ROCKLITE (HDU), versatile and strong: 

Rocklite (HDU) Gallery

• Exterior or Interior product
• High Density Urethane is an expanded plastic with gas filled micro cells to make it lighter.
• Great Exterior material (15 to 18 pound density recommended)
• Used for Simulated Sandblasted Wood Signs; Pebble carved backgrounds V-Groove signs & more.
• Can be metal faced, or painted with Pantone Automotive paints, or surfaced with our Acryseal plastic.
• Can be faced with Hotseal surfacing which is a non-laminated surfacing process.
• Thickness available: ½”; ¾”; 1”; 1-1/2” & 2”

 

ACRYLIC: also known as Plexiglass

• Exterior or Interior product
• Choose from over 1000 Pantone colors when surfaced with Acryseal.
• Available in Non-glare or High-gloss finishes
• Acrylic may also be surfaced with anodized metal or painted with automotive paints.
• Thickness available: 1/16”; 1/8”; 3/16”; ¼”; ½”; ¾” 1” (anything over ½” starts getting very expensive)

 

ALUMINUM COMPOSITE:

• Exterior or Interior product
• Solid polyethylene core sandwiched between two layors of thin aluminum sheets.
•  Also know as Alumacore, Signabond, Dibond, Reynobond, Alucobond, and Alpolic just to name a few.
• Great for large surfaces that need strength like sign panels or large logos
• Can be metal faced or painted with Pantone Automotive paints.
• Thicknesses available: 3mm & 6mm (can be layered to get thicker as needeed)

 

EPVC (Expanded Poly Vinyl Chloride):

• It is suggested as Interior in most cases but can be great for Exterior in some situations.
• Same plastic as is used for pluming but with micro tiny gas filled cells to make it lighter.
• It can be cut into letters & logo shapes.
• Can be metal faced or painted with Pantone Automotive paints & may be surfaced with our Acryseal plastic.
• Thickness available: ¼”; 3/8”; ½”; ¾”; 1”; 1-1/2” & 2”

 

GATORFOAM:

Styolite which is sandwiched between two layers of plastic impregnated paper

• Interior only
• Can be cut into letters & logo shapes.
• Metal faced or painted with only water base paints & can be surfaced with our Acryseal plastic.
• Thickness available: ¼”; ½”; ¾”; 1”; 1-1/2” & 2”

 

 STYROFOAM:

• Interior only and can be cut into letters & logo shapes.
• Can only be painted with water base paints.
• Thickness available: 1” unless ordered special
• We only use the Styolite brand as it is a more dense (non-bead type) Styrofoam

 

SOLID ALUMINUM:

• Exterior or Interior product-Can be metal faced or painted with Pantone Automotive paints.
• Thickness available: .040; 1/8”; 3/16”; ½”; ¾”; 1” (anything over ½” starts getting very expensive)
• Please note: Aluminum Composite is less expensive than solid aluminum and in most cases, holds up just as well.